Hi just wondering. I have recently installed fetch to and I have already programmed some items to record. These I can see in the recording menu or the scheduled section all except one this is active and tagged when I go to it and press info button but it is not in my recordings or scheduled section. Any ideas?.
I don't know but what I would do is cancel the recording then set it to record again.
See it that works.
Ok I will try
yes this has now worked. although now other programmes that are in the recorded section are not now showing in the scheduled for further episodes. Does this happen later, or should I delete and re-do these also??
These programs were selected as series record?
I think I would start all over again by deleting all recordings and then keep a careful eye on them.
I have never had problems with recordings on the fetch box so hopefully just a book at the start.
Yes thanks. After I replied I did just that and now it seems to be working. Hopefully I won't be doing this every day/week as I will probably have lots more items as time goes on! I have not had much luck so far as I've now had this for a week with on,y one day full service and many drop outs yesterday.
Also so I was told that the wifi range of this new NBN system would be fantastic but I am not gettting this at all and set keeps telling me that due to amount of devices linked it is draining the feed. Most of the extra devices are now linked to a booster that I have, and if I'm at one end of the house the booster has the better connection. , main unit that is 9 inches away from the modem and has an Ethernet connection drops out constantly.
I imagine you have a sagemcom modem which doesn't have the best wifi range. If you have a home phone you will need to keep it but you can think about bridging you own modem to it. If you don't have a home phone it is possible, now you connected, to use your own preferred modem.
If you research on this forum you will see many solutions to these set ups.
FWIW wifi is not related to NBN. NBN delivers speed to the modem.
Not sure what equipment is reporting your "feed" is being drained? Wifi devices usually only use bandwidth if they're being used. So you can have 100 devices connected but if you're only using one it takes 100% of the available bandwidth.
You might want to explore ethernet over power. Read about them here.