Description & Background
I have the SagemCom F@st 3864AC modem which every couple of days needs a reboot to get it back to a usable operating speed. It typically reaches this point where the connection just freezes (web browser load bar at 20%) and the spinning wifi symbol. Not only does it happen on the 2.4GHz channel but also on the 5GHz channel and when you try to login to the web admin interface that just repeatably asks for login credentials and that's all
Steps to Try and Solve
Ok so a couple (4 chats) to support and this is what has evolved
Ok so a couple of questions to the community.
Note that i was previous OPTUS cable subscriber - renovated my house and then had to re-establish the connection so got a new modem and it's been an ever decreasing decline in performance of the wifi unit.
If you are pushing too much through it, it's possible it's just not coping with the workload. They weren't exactly designed as high end units.
Thanks for feedback. I had suspected that data volume may be an issue but there have been equally if not more occassions when there was no previous large data sessions and simply trying to use email is a flop.
Is it just the quality of the wireless router which OPTUS sends out ?
Ok. So quick update - kept getting the problem and Optus sent out a new Sagemcom F@ST3864v3HP model this time.
Still wanted to know can i just ditch this somewhat lack-lustre wifi unit with a mesh unit via a cable from the HFC box (modem?) to the wan port on a new shiny mesh unit ?
If your mesh unit is a router as well, then yes.
or you could just turn the wifi off on the f@st and plug the mesh unit into the lan port on the f@st?
note, if you remove the f@st, Optus won’t log faults to nbn until it’s proven with the f@st.
Thanks for the info
Is it feasible to take the WAN output from the Netgear HFC unit and plug into a wireless router like the TP-Link AS1900 or equivalent ? This looks like it can handle larger volumes of streaming traffic